500W to 550W: 12 Power Supplies Compared
by Christoph Katzer on February 20, 2009 5:00 AM EST- Posted in
- Cases/Cooling/PSUs
Comparison: Prices
Not all of the power supplies are available in all locations, so we quote the European price in light green/red and the US price in dark green/red. Red prices indicate that we are not satisfied with the overall bang for the buck, while green bars indicate a good bargain. Note that the color of the bar is not based strictly on pricing; quality is also important, so a low price on a poor quality PSU won't garner a green bar.
Akasa only plans to sell their product in Europe, focusing on the UK, and frankly the price is far too high for an Enhance platform -- BFG and Tagan are able to sell similar units for a lot less money. The Enermax Liberty Eco is another power supply that is simply too expensive at this point in time. It might offer good performance, but for the same price you can find better power supplies.
In terms of recommendations, Arctic Cooling's Fusion has a very low price of just €54 or $64, making them the least expensive unit in this roundup. For the performance and features, the Fusion 550 is a worthwhile PSU. The $70 BFG also offers a very good price to performance ratio, although BFG only targets the North American market. In contrast, we recommend the Tagan SuperRock unit with a price of €65, which is not yet available in the US.
Facebook
Twitter
RSS
62 Comments
View All Comments
whpromo - Wednesday, March 11, 2009 - link
I am a bit confused on the BFG LS550 part number. There appears to be two different ones, BFGR550WLSPSU and BFGR550WLPSU, listed on the BFG website. The former is listed in some places on the BFG website as the single 12v rail as tested here, the latter the typical 12v quad rail that is the most common BFG Tech PSU configuration. BUT when I look at retailers listing the part number for the single rail version, it's specified as a quad rail configuration and even BFG website has it listed as that on the website at http://www.bfgstore.com/ProductDetails.asp?Product...">http://www.bfgstore.com/ProductDetails.asp?Product... So where is this single 12v rail version in the wild? Was it made just for AnanTech to test?jonnyGURU - Wednesday, May 13, 2009 - link
Typo. They're actually BOTH BFGR550WLSPSU. The old one is made by Fore Point and has four +12V rails. The new one is made by Enhance and has a single +12V rail. The Enhance built one is the one reviewed here. They both have the same topology and grade of components (the Enhance built one does have a few better quality capacitors than the Fore Point built one) and in some cases the new Enhance built one actually reviewed better than the older one when reviewed by the same person:NEW: http://www.jonnyguru.com/modules.php?name=NDReview...">http://www.jonnyguru.com/modules.php?name=NDReview...
OLD: http://www.jonnyguru.com/modules.php?name=NDReview...">http://www.jonnyguru.com/modules.php?name=NDReview...
OSJF - Wednesday, March 4, 2009 - link
Hallo Christoph,I just got Tagan's SuperRock 600W edition(EU/de). I can confirm it has indeed very stable voltages.
But it's not that quite as yours obviously was. I can't hear my Sapphire 4870 1024 Toxic at all but the SuperRock's makes a hum noise.
My three year old Tagan TG420-U01 is still way less noisy then this SuperPiece of a power supply :)
greetings from good old europe
OSJF
jmurbank - Tuesday, February 24, 2009 - link
There is one very important thing that you miss in your test is what computer it will be powering. If it is an Intel system, the three power supplies that you choose are OK for low to low-mid setups. For an AMD system, it will not. The 5 volt and 3.3 volt rails need to have a combined wattage of 150 watts or more. Only power supply units that you tested are OCZ and Sunbeam that provides this power requirement. You are providing false reviews and people rely on this review have to think twice. There are significantly better power supplies at this wattage level that equals or exceeds the combined power requirement for 3.3 volt and 5 volt rails. Please next time select models that are up today's standards.A power supply unit that exceeds combined power requirement for 3.3 volt and 5 volt rails is the following.
Seasonic S12 Energy Plus SS-550HT
It does not work with European standards that requires over 80% of efficiency, but it makes just about any computer to power up with out any problems at a cheap price.
Christoph Katzer - Tuesday, February 24, 2009 - link
What "AMD"-system we are talking about?jmurbank - Wednesday, February 25, 2009 - link
AMD Athlon processors and up.I have an AMD Athlon computer that has such requirement when I built it at the time. Also I had to recently replace the power supply in an HP computer that contains an AMD processor. The aged power supply was within the requirement. Majority of the motherboard manuals for AMD systems also states this requirement.
Christoph Katzer - Tuesday, February 24, 2009 - link
"There is one very important thing that you miss in your test is what computer it will be powering."I am running the BFG LS-550 with the a Core i7-965 on an Asus P6T Deluxe with a Geforce 9800GX2 graphics card.
You can pretty much power up everything that fits the number of connectors ;)
v12v12 - Tuesday, February 24, 2009 - link
Yeah I agree, the poster above is purely speculating and his post is riddled with conjecture. I've yet to see a system that wouldn't power up correctly with in that rigid spec or not. A 400/500/600W PSU etc... will power just about any modern system. <--- Notice how vague that is? But it still holds true, irregardless of the so-called "spec." Unless you're running well below the minimum REQUIRED power ratings, it's going to work buddy lol!Thank god PSU prices have started to drop to "reasonable" rates. No way in hell am I ever going to spend $100+ for a PSU unless I'm building a near-line/server machine. Luckily the gamer/addict fanboys have now priced themselves out of the common-sense market. Now we (less than zealous) can get back to building nice machines, w/o spending an arm and leg to power them with these (still) over sized square bricks called "PSUs." 2009 and we're still cramming in huge boxes with a bunch of wires surging out of them like snakes trying to escape a pit...
Lastly, Enhance has once again proven it's THE premier OEM, like I knew back in the E4300 days, while everyone else was fanboying hyped brands.
jmurbank - Wednesday, February 25, 2009 - link
Sure high powered power supplies that are under spec for the combined wattage for 3.3 volts and 5 volts will work for now, Can you guarantee four to five years from now. I can guarantee the unit that I suggested will work for five years.On AMD web site it saids "..Overall current usage limitation on the power supply should not exceed a combined system power output for the +5V and +3.3V outputs."
http://www.amd.com/us-en/Processors/TechnicalResou...">http://www.amd.com/us-en/Processors/Tec...es/0,,30...
http://www.amd.com/us-en/Processors/SellAMDProduct...">http://www.amd.com/us-en/Processors/Sel..._4458_35...
http://www.amd.com/us-en/Processors/TechnicalResou...">http://www.amd.com/us-en/Processors/Tec...rces/0,,...
strikeback03 - Monday, February 23, 2009 - link
Any idea if the fan makers plan to move on to the present and switch to SATA power connectors? I haven't used a Molex connector for anything other than a fan in a few years, and it is annoying to have to install a Molex harness just to run a fan or two.And on a related note, why does Antec use case fans which are only Molex powered? Wired to use motherboard headers is so much better, include an adapter like Cooler Master does if you think users want to run them off Molex.